Fabrication of Continuous Nickel-Coated Carbon Fiber Reinforced Aluminum Matrix Composites Using Low Gas Pressure Infiltration Method

Le résumé fourni par la source

Based on the principle of vacuum counter-pressure casting, a low gas pressure infiltration technology was developed to fabricate the Ni-coated carbon fiber reinforced A357 alloy composites. The soundness and microstructure of the as-cast composites were investigated. The results show the relative density increases with the increase of melt temperature, while it firstly increases and then declines as the fiber temperature and infiltration pressure increased. The enhancement of melt and fiber temperature can eliminate the incomplete infiltration defects and improve the uniformity of fiber distribution. The insufficient infiltration pressure leads to some micro-pores in the matrix alloy. However, the over high fiber temperature and infiltration pressure may result in the separation of nickel coating and the fiber aggregation respectively, both of which are responsible for the partial un-infiltrated or insufficient filling defects. The appropriate infiltration parameters identified in this study could provide a reference for inhibition of the hazard interfacial reactions by optimizing the low gas pressure infiltration process.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.