Nanowatt-Scale Power Management for On-Chip Photovoltaic Energy Harvesting Beacons

Le résumé fourni par la source

A power-management architecture is presented for bulk-CMOS indoor beacons powered by on-chip photovoltaic energy conversion and storage. The extremely restrictive power and form-factor constraints of indoor operation are met by adopting an asynchronous transmit-only functionality, a distributed power-supply network of dual-supply converters, and a minimalist approach at the topological level of design. Architectural functionality is demonstrated on a radio-frequency identification tag application integrated in a 0.18- μm CMOS technology with deep n-well option. Load voltage is boosted to 1.9 V, stored across a 240-pF on-chip capacitor, and let drop by 0.6 V to release 230-pJ energy for transmitting a 16-bit codeword in each beacon interval. The measured value of beacon interval is 2.7 s at the lower limit 20 μW/cm2of indoor irradiance, and 25.6 ms at the higher limit 2 mW/cm2. The electrical power consumed in the entire system varies from less than 2 nW to 250 nW between these limits. Duty cycle of transmission is relatively insensitive to irradiance, and remains below 0.2% over the entire range. Storage-capacitor and converter footprints are 0.07 mm2and 0.35 mm2, respectively. Upgrading to 64-b codeword and 920-nJ transmission energy quadruples the footprint of the capacitor and triples that of the converters.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.